| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Metal Bodies http://www-.luthiersforum.com/forum/viewtopic.php?f=10104&t=16787 |
Page 1 of 1 |
| Author: | hoosieruke [ Wed Apr 09, 2008 6:27 am ] |
| Post subject: | Metal Bodies |
Any one know enough about metalwork to discuss to the process for making a metal bodied instrument...commercially or in a small shop? Thanks, Geoff |
|
| Author: | kfish [ Thu Apr 10, 2008 6:42 am ] |
| Post subject: | Re: Metal Bodies |
Sooner or later Mike Dotson will probably respond as he has some experience at this. There is a great photo essay on MIMF and some other information in the archives there. I think you can browse this essay without a logon so I'll post it. Usually I'm ready to make just about anything and this makes it look so easy, but I hated metal shop and doing body work so I'm taking a pass. http://www.mimf.com/library/paulick_build_tricone.htm Kent |
|
| Author: | Guest [ Thu Apr 10, 2008 11:15 am ] |
| Post subject: | Re: Metal Bodies |
Thanks for the lead. Great information there. Geoff |
|
| Author: | Mike Dotson [ Thu Apr 17, 2008 10:14 pm ] |
| Post subject: | Re: Metal Bodies |
Sorry I ain't been around much. The MIMF library is still the best place to go, lots of good stuff particularly Chris' essays, I never took many pictures. Anything else you need feel free to ask here or email me. |
|
| Author: | Chris Paulick [ Sat Jun 21, 2008 11:11 am ] |
| Post subject: | Re: Metal Bodies |
I just registered here. I'm glade to see that you all find the essay helpful. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|